Meetup Pro

Getting Started with Meetup

The Meetup Pro modules allow you to list, find, and retrieve groups, group boards, events, or photos in your Meetup Pro account.

Prerequisites

  • A Meetup Pro account

In order to use Meetup with Make, it is necessary to have a Meetup Pro account. If you do not have one, you can create a Meetup Pro account at www.meetup.com/pro.

Note

The module dialog fields that are displayed in bold (in the Make scenario, not in this documentation article) are mandatory!

Connecting Meetup to Make

To connect your Meetup account to Make you need to create a Meetup OAuth app to obtain the Client ID and Client Secret.

  1. Go to Meetup API, and log in using your Meetup credentials.

  2. Open OAuth Consumers settings, and click the Create New Consumer button.

    61f27345e2d52.gif
  3. Fill in the Consumer, Application Website, and Redirect URL fields as follows:

    Consumer

    Enter the name of the OAuth app. E.g. Make

    Application Website

    https://www.integromat.com

    Redirect URL

    https://www.integromat.com/oauth/cb/meetup

    61f273483bacd.png
  4. Fill in the rest of the required fields as needed, check the Yes, I agree checkbox, and click the Register Consumer button.

    Supply additional information, and click the Register Consumer button again.

  5. When your Consumer registration is approved, the Key (Client ID) and Secret (Client Secret) are provided.

    61f273498882d.png
  6. Go to Make, and open the Meetup Pro module's Create a connection dialog.

  7. Enter the Client ID and Client Secret from step 5 (above) to the respective fields, and click the Continue button to establish the connection.

    61f2734a6ff19.png

The connection has been established. You can proceed with setting up the module.

Groups

Retrieves user's groups.

Connection

Establish a connection to your Meetup account.

Limit

Set the maximum number of groups Make will return during one execution cycle.

Searches for groups based on text, location, category, and topic.

Connection

Establish a connection to your Meetup account.

Topic ID

Add the topic IDs you want to search groups for. You can enter the topic ID or search for the topic using the Find Topics button.

61f2734bb9511.gif

Text

Enter the search term. Performs the fulltext search.

Category ID

Select the categories you want to filter results by.

Zip Code

Enter the zip code to limit the location of the search.

Longitude

Enter the approximate longitude to specify the group location.Use negative numbers for degrees west.Must be used in combination with latitude.

Note

Giving no location information will default the location to your Meetup Profile Location.

Latitude

Enter the approximate latitude to specify the group location.Use negative numbers for degrees south.Must be used in combination with longitude.

Note

Giving no location information will default the location to your Meetup Profile Location.

Radius

Enter the radius. 0-100 kms/miles. If left empty, the user's preferred radius will be used.

Location

Enter the location name you want to search groups by. This field will be ignored if the location parameters in the fields above are defined.

Giving no location information will default the location to your Meetup Profile Location.

Have upcoming events?

If the Yes option is selected, then only groups that have upcoming events will be returned.

Fallback Suggestions

If the Yes option is selected and no matching criteria are found for your search, alternative suggestions will be returned.

Include/exclude

Select whether to include or exclude groups you are a member of.

Limit

Set the maximum number of groups Make will return during one execution cycle.

Returns a list of five similar groups.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/> then Tech-Meetups-Prague is the Group URL Name.

Limit

Set the maximum number of groups Make will return during one execution cycle. The maximum allowed number of returned groups is 5.

Retrieves information about the specified group.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/> then Tech-Meetups-Prague is the Group URL Name.

Optional Fields

Select the optional fields that will be included in the result.

Allows an authorized user to change the group details.

Required Permissions: group_edit

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/ then Tech-Meetups-Prague is the Group URL Name.

Note

You must be the organizer to edit the group details.

Name

Enter the new name of the group. Can be at most 60 characters.

Description

Enter the group description. You can use simple HTML formatting.

Welcome message

Enter the message sent to members after they join. Can be at most 2,000 characters.

Who

Enter the "nickname" of the group members.

Member Join Mode

Select how members are let into the group.

Open: Anyone can join.

Closed: Not accepting new members.

Approval: Members must be approved.

Note, the 'closed' options is only available to groups that already have a 'closed' join mode.

Group Mailing List Mode

Select who can post to the group mailing list, whether everyone, nobody, on approval, or only organizers.

Group Visibility

Select one of the options to restrict the group visibility for nonmembers. Choose from public, public limited, or members. Note, the members option is only available to groups that already have members visibility.

Photo required for members

Select whether new users need to provide a photo before joining the group.

Country

Enter the country in the ISO 3166-1 format.

Google Analytics Code

Enter the Google Analytics code for the group.

Social network URI

Provide the addresses to the social network services.

Retrieves a group's message boards.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name that contains the message boards you want to retrieve. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/> then Tech-Meetups-Prague is the Group URL Name.

Limit

Set the maximum number of boards Make will return during one execution cycle.

Retrieves discussions from a specified message board.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name that contains the message board you want to retrieve discussions from. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/> then Tech-Meetups-Prague is the Group URL Name.

Limit

Set the maximum number of discussions Make will return during one execution cycle.

Retrieves posts from a specified discussion.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name that contains the message board you want to retrieve discussion posts from. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/> then Tech-Meetups-Prague is the Group URL Name.

Board ID

Enter the ID of the board you want to retrieve posts from.

Discussion ID

Enter the ID of the discussion you want to retrieve posts from.

Limit

Set the maximum number of posts Make will return during one execution cycle.

Retrieves members of a specified group.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name of the group you want to retrieve members from. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/> then Tech-Meetups-Prague is the Group URL Name.

Limit

Set the maximum number of members Make will return during one execution cycle.

Order by

Select whether you want to sort the result by name, time of joining, or return the leadership team only.

Filter by Status

Select the member's status you want to filter results by.

Note

Only organizers have access to the pending members.

Retrieves the group member's profile.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name of the group you want to retrieve a member from. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/> then Tech-Meetups-Prague is the Group URL Name.

Member ID

Enter (map) the ID of the member you want to retrieve details about.

Optional Fields

Select the optional fields to be included in the result.

Updates the group profile of a group member

Required Permissions: profile_edit

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name of the group you want to retrieve members from. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/> then Tech-Meetups-Prague is the Group URL Name. You must be the organizer of the group to update the group member profile.

Member ID

Enter (map) the member ID of the member whose details you want to update.

Give role

Allows organizers to assign the role to the member. Select one of the roles you want to assign to the member specified above.

Note

The given role will overwrite the member's current role. You don't have to remove the old role before assigning a new one.

Remove role

Allows organizers to remove the role from the member of the group. This function changes the role of the member back to a basic member role.

Title

Enter the title for the selected member.

This module allows you to approve one or more requests for group membership.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name of the group you want to approve members for. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/> then Tech-Meetups-Prague is the Group URL Name. You must be the organizer of the group to approve the membership.

Member ID

Enter (map) the member IDs of the members that you want to approve.

Welcome Message

Enter the message to be sent to the members being approved. If not provided, the group's default welcome message will be sent. The max message size is 2,000 characters.

Send Copy?

Select the Yes option to send group organizers a copy of the message sent to the approved members.

This module allows you to decline one or more requests for group membership.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name of the group you want to decline membership from. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/> then Tech-Meetups-Prague is the Group URL Name. You must be the organizer of the group to decline the membership.

Member ID

Enter (map) the member IDs of the members that you want to decline.

Send Copy?

Select the Yes option to send group organizers a copy of the message sent to the declined members.

Explanation

Enter the explanation to be sent to the users that are being declined.

Anonymous?

Select the Yes option to hide the declining member's email address in the resulting response.

Ban?

Select the Yes option to ban the declined member from the group in the future.

Watches the group for the new members.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name of the group you want to watch for new members. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/> then Tech-Meetups-Prague is the Group URL Name.

Filter by Status

Select whether to retrieve active members, pending members, or both.

Optional Fields

Select the optional field as a filter.

Limit

Set the maximum number of members Make will return during one execution cycle.

Events

Returns all events you have joined.

Connection

Establish a connection to your Meetup account.

Status

Enter the Group URL Name of the group you want to retrieve events from. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/> then Tech-Meetups-Prague is the Group URL Name.

RSVP

Select whether you are on the wait list or if you have RSVP'd.

Limit

Set the maximum number of events Make will return during one execution cycle.

Returns events within a group.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name of the group you want to retrieve events from. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/> then Tech-Meetups-Prague is the Group URL Name.

Limit

Set the maximum number of events Make will return during one execution cycle.

Status

Select the statuses of the events you want to return.

No earlier than

Make will not return events with a start time earlier than the time specified in this field. Supported date formats.

No late than

Make will not return events with a start time later than or equal to the time specified in this field. Supported date formats.

Descending order?

Select the Yes option to sort results in descending order.

Event ended?

Select the Yes option to return events that have ended.

Scroll to

Returns the next ongoing or upcoming Meetup event. If there are no ongoing or upcoming events, this defaults to recurring past events.

Retrieves event details.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/> then Tech-Meetups-Prague is the Group URL Name.

Event ID

Enter (map) the ID of the event you want to retrieve details for.

Optional Fields

Select the optional fields that will be included in the result.

Creates a Meetup group event.

Required Permissions: event_management

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name of the group you want to create the event for. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/> then Tech-Meetups-Prague is the Group URL Name.

Name

Enter the name for the new event in 1 - 80 characters.

Description

Enter the description of the event. Simple HTML formatting is allowed. Maximum 50,000 characters.

Featured Photo ID

Enter (map) the photo for the event. The photo must be associated with this group. The photo ID can be retrieved only via Ninox UI by uploading the photo to the group and then opening it.

61f2734de54b8.png
61f2734f6d7cb.png

Publishing Status

Select the status of the event. Default is Published.

Note

Draft events are only visible to the leadership team.

Announce

Select the Yes option to announce the event in the group. Draft events cannot be announced.

Event Start Time

Enter the event start time. Consult the list of supported date and time formats.

Note

Not setting a start time will give the event the 'proposed' status.

Duration

Enter the event duration in milliseconds. When left empty, the default 10,800,000 (3 hours) is used.

RSVP Open Time

Enter the time after which members will be allowed to RSVP to the event in milliseconds. This can only be set if there is a start time for the event.

RSVP Close Time

Enter the time before which members will be allowed to RSVP to the event in milliseconds. This can only be set if there is a start time for the event.

RSVP Limit

Enter the number of RSVP slots available for the event. When undefined or defined as 0, there will be no limit set.

Guest Limit

Enter the number of guests that members may include in their RSVP, 0 inclusive. When left empty, 2 guests are set.

Payment Method

Enter the payment method for the event fee if a fee is charged for the event.

Note

This setting cannot be changed through the API afterwards. It can be changed only via the web platform.

Event Fee

Enter the amount of the event fee if a fee is charged for the event. If the group is in the United States, this may not exceed 4,999 (for any currency). Otherwise, this may not exceed 1,000,000 (for any currency). If the event fee is charged with WePay, this must be at least 1.00 USD.

Note

This setting cannot be changed through the API afterwards. It can be changed only via the web platform.

Currency

Select the currency for the event fee if a fee is charged for the event.

Note

This setting cannot be changed through the API afterwards. It can be changed only via the web platform.

Fee Refund Policy

Enter the text content for the refund policy if the event has a fee. Maximum 250 characters.

Event Hosts

Add up to 5 valid member IDs for members who will be hosts of the event. If no host is defined, then you (authenticated user) are the host.

'Find us' String

Enter the "How to find us" description for the location of the host(s) at the event venue.

Question

Enter the text content of the RSVP survey question for the event. Maximum 250 characters.

RSVP self

Select whether you will be RSVP'd to the event upon creation.

Venue ID

Enter the venue ID. This can be retrieved only via the Ninox web platform by adding a location or venue to an event and then using the Make modules to retrieve the event and see the ID.

Longitude

Enter the longitude representing the adjusted venue longitude. Use negative numbers for degrees west. Must be used in combination with latitude. Giving no location information will default the location to your Meetup Profile Location.

Latitude

Enter the latitude representing the adjusted venue latitude. Use negative number for degrees south. Must be used in combination with longitude. Giving no location information will default the location to your Meetup Profile Location.

Venue Visibility

Select whether the event venue and host location description will be visible to nonmembers of the hosting group. The default is "Public".

Updates event information.

Required Permissions: event_management

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name of the group you want to update the event for. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/ then Tech-Meetups-Prague is the Group URL Name.

Event ID

Select or map the event you want to update.

Please find the descriptions of the fields in the Create Event section above.

Removes or cancels an event from the group's calendar.

Required Permissions: event_management

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name of the group you want to delete the event for. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/ then Tech-Meetups-Prague is the Group URL Name.

Draft or Published

Remove From Calendar

Select whether to remove or cancel the event.

Remove from the calendar/delete: Select the Yes option.

Cancel the event: Select the No option.

Update Event Series

Select the Yes option to update all future recurrences of this event, if this event belongs to an event series.

Note

Requesting this for an event that doesn't belong to an active series will result in an error.

Retrieves new group events.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name of the group you want to delete the event for. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/ then Tech-Meetups-Prague is the Group URL Name.

Status

Select event statuses you want to return. Draft status cannot be selected with other status values.

Optional Field

Select optional fields that should also be returned by the module.

Limit

Set the maximum number of events Make will return during one execution cycle.

The module returns all members that have reacted 'yes' or 'no' and members that were marked as either 'attended', 'noshow', or 'absent'.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/ then Tech-Meetups-Prague is the Group URL Name.

Event ID

Enter (map) the ID of the event you want to retrieve attendees from.

Limit

Set the maximum number of members Make will return during one execution cycle.

Retrieves a list of event RSVPs.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/ then Tech-Meetups-Prague is the Group URL Name.

Event ID

Enter (map) the ID of the event you want to retrieve RSVPs from.

Limit

Set the maximum number of RSVPs Make will return during one execution cycle.

Filter RSVPs

Select whether to return "Yes" or "No", or both responses.

Descending order?

Select the Yes option to sort results in descending order.

Optional Fields

Select the optional fields that will be included in the result.

Opens the RSVP for an event.

Required Permissions: event_management

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/ then Tech-Meetups-Prague is the Group URL Name.

Event ID

Enter (map) the ID of the event you want to open the RSVPs for.

Closes the RSVP for an event.

Required Permissions: event_management

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/ then Tech-Meetups-Prague is the Group URL Name.

Event ID

Enter (map) the ID of the event you want to close the RSVPs for.

Retrieves new RSVPs for the event.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/ then Tech-Meetups-Prague is the Group URL Name.

Filter RSVPs

Use to filter RSVP responses. Default is All.

Optional Fields

Select fields that will also be returned by this module.

Limit

Set the maximum number of RSVPs Integomat will return during one execution cycle.

Retrieves hosts of the event.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/ then Tech-Meetups-Prague is the Group URL Name.

Event ID

Enter (map) the ID of the event you want to retrieve hosts from.

Adds a comment or reply to the event.

Required Permissions: group_content_edit

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/ then Tech-Meetups-Prague is the Group URL Name.

Event ID

Enter (map) the event ID of the event you want to post a comment for.

Original Comment

Select the comment you want to reply to.

Comment

Enter the text content of the comment. Maximum 1,024 characters.

Removes the comment on an event.

Required Permissions: group_content_edit

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/ then Tech-Meetups-Prague is the Group URL Name.

Event ID

Select (map) the event ID of the event you want to delete.

Comment ID

Enter (map) the comment you want to delete.

Searches for upcoming events based on time and location.

Connection

Establish a connection to your Meetup account.

Limit

Set the maximum number of events Make will return during one execution cycle.

Longitude

Enter the approximate target longitude. Use negative numbers for degrees west. Must be used in combination with latitude. Giving no location information will default the location to your Meetup Profile Location.

Latitude

Enter the approximate target latitude. Use negative number for degrees south. Must be used in combination with longitude. Giving no location information will default the location to your Meetup Profile Location.

Radius

Enter the radius in miles. Can be 0.0-100.0. The decimal number will be rounded off to a whole number. Defaults to member's preferred radius if no radius is given.

Text

Enter the search term. The fulltext search will be performed based on the entered search term.

Start date

Enter the start date of the range. Events after the entered date will be returned. Please use YYYY-MM-DDTHH:MM:SS date format.

End date

Enter the end date of the range. Events before the entered date will be returned. Please use YYYY-MM-DDTHH:MM:SS date format.

End time

Enter the time to return events that start before the entered time. Please use HH:MM:SS time format.

Sorting factor

Select whether to sort events by recommendation score or by the event's start time.

Include/exclude

Select 'include' or 'exclude' or 'only' to return groups that the member belongs to. Defaults to 'include.'

Excluded group IDs

Enter (map) group IDs of groups whose event you want to exclude from the result.

Retrieves all upcoming events from your account's calendar.

Connection

Establish a connection to your Meetup account.

Limit

Set the maximum number of events Make will return during one execution cycle.

Returns comments and replies for a Meetup event.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/> then Tech-Meetups-Prague is the Group URL Name.

Event ID

Enter (map) the ID of the event you want to retrieve comments from.

Limit

Set the maximum number of comments Make will return during one execution cycle.

Photos

Returns the comments on a photo.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/> then Tech-Meetups-Prague is the Group URL Name.

Event ID

Enter (map) the ID of the event that contains the photo you want to retrieve comments from.

Photo ID

Enter (map) the ID of the photo you want to retrieve comments from.

Limit

Set the maximum number of comments Make will return during one execution cycle.

Retrieves new photos of the group.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/> then Tech-Meetups-Prague is the Group URL Name.

Limit

Set the maximum number of photos Make will return during one execution cycle.

Retrieves links to photos from the specified event.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/ then Tech-Meetups-Prague is the Group URL Name.

Event ID

Enter (map) the ID of the event you want to retrieve photos from.

Limit

Set the maximum number of photos Make will return during one execution cycle.

Retrieves the details of a photo from the specified event.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/ then Tech-Meetups-Prague is the Group URL Name.

Event ID

Enter (map) the ID of the event you want to retrieve the photo from.

Photo ID

Enter (map) the Photo ID of the photo you want to retrieve details about.

Optional fields

Select additional fields you want to return using the module.

Uploads a new photo to the event.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/ then Tech-Meetups-Prague is the Group URL Name.

Source File

Map the file you want to upload from the previous module (e.g., Dropbox > Get a file), or enter the file name and file data manually. The maximum file size is 10 MB.

Caption

Enter a caption for the photo.

Allows you to change the photo caption.

Required Permissions: group_content_edit

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/ then Tech-Meetups-Prague is the Group URL Name.

Event ID

Enter (map) the ID of the event that contains the photo you want to update.

Photo ID

Enter (map) the Photo ID of the photo you want to change the caption for.

Caption

Enter a new caption for the photo.

Removes a photo from the event.

Required Permissions: group_content_edit

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/ then Tech-Meetups-Prague is the Group URL Name.

Event ID

Enter (map) the ID of the event that contains the photo you want to delete.

Photo ID

Enter (map) the Photo ID of the photo you want to delete.

Retrieves photo album from the selected group.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/ then Tech-Meetups-Prague is the Group URL Name.

Limit

Set the maximum number of photos Make will return during one execution cycle.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/ then Tech-Meetups-Prague is the Group URL Name.

Album ID

Enter (map) the album ID of the album you want to upload the photo to.

Source File

Map the file you want to upload from the previous module (e.g., Dropbox > Get a file), or enter the file name and file data manually. The maximum file size is 10 MB.

Caption

Enter a caption for the photo.

Lists all photos uploaded to the group.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/ then Tech-Meetups-Prague is the Group URL Name.

Limit

Set the maximum number of photos Make will return during one execution cycle.

Retrieves photos from a specified album.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/> then Tech-Meetups-Prague is the Group URL Name.

Album ID

Enter (map) the ID of the album you want to retrieve photos from.

Limit

Set the maximum number of photos Make will return during one execution cycle.

Pro

Search Meetup groups belonging to a Pro organization by the specified filter settings.

Connection

Establish a connection to your Meetup account.

Pro Organization URL Name

Enter the Pro Group URL Name.

Limit

Set the maximum number of Pro groups Make will return during one execution cycle.

Searches Meetup Pro group members by the specified filter settings.

Connection

Establish a connection to your Meetup account.

Pro Organization URL Name

Enter the Pro Group URL Name.

Filter: Active Within Days

Enter the number of days past in order to return only members who have been active within these specified days.

Filter: By Chapter IDs

Add chapters to which the member you're searching for belongs.

Filter: By Country

Enter the member's country.

Filter: Maximum Events Attended

Enter the maximum number of attended events.

Filter: Minimum Events Attended

Enter the minimum number of attended events.

Filter: Is Organizer?

Select the Yes option to return only organizers and the No option to return only nonorganizers.

Filter: Join Date Maximum

Enter the latest date and time for members to join. Consult the list of supported date and time formats.

Filter: Join Date Minimum

Enter the earliest date and time for members to join. Consult the list of supported date and time formats.

Filter: By Name

Enter the name of the member you want to filter the results by.

Filter: By Query

Enter the name or the city you want to search Pro group members by.

Limit

Set the maximum number of Pro groups Make will return during one execution cycle.

Retrieves the list of RSVP responses for events across the entire Pro network.

Connection

Establish a connection to your Meetup account.

Pro Organization URL Name

Enter the Pro Group URL Name.

Limit

Set the maximum number of responses Make will return during one execution cycle.

Retrieves issued tickets belonging to a Pro organization.

Connection

Establish a connection to your Meetup account.

Pro Organization URL Name

Enter the Pro Group URL Name.

Filter: By Chapter IDs

Add chapter IDs of chapters which the member belongs to.

Filter: By Chapter Name

Enter the partial or full name of the redeemed chapter.

Filter: By 2 Letter Country Code

Enter the two-letter country code of the redeemed chapters.

Filter: By Ticket Status

Select whether to return inactive, available, claimed, or/and redeemed tickets.

Filter: By Ticket Key

Enter the full matching string of an issued ticket key to filter results by.

Limit

Set the maximum number of tickets Make will return during one execution cycle.

Other

Retrieves a list of group categories.

Connection

Establish a connection to your Meetup account.

Limit

Set the maximum number of categories Make will return during one execution cycle.

Recommends suggestions for group topics based on a text search or other topics.

Note

Text Query field or Topic IDs field is required.

Connection

Establish a connection to your Meetup account.

Text Query

Enter the search term you want to search recommendations for.

Topic IDs

Add topics you want to use for recommendations.

Limit

Set the maximum number of topics Make will return during one execution cycle.

Excluded Topics

Add topics you want to exclude from recommendations.

Returns member details.

Connection

Establish a connection to your Meetup account.

Member ID

Enter the ID of the member you want to retrieve information about.

Optional Fields

Select additional fields you want to include in the result.

Allows you to perform a custom API call.

Connection

Establish a connection to your Meetup account.

URL

Enter a path relative to https://api.meetup.com/. E.g., find/topics

Note

For the list of available endpoints, refer to the Meetup API Documentation.

Method

Select the HTTP method you want to use:

GET

to retrieve information for an entry.

POST

to create a new entry.

PUT

to update/replace an existing entry.

PATCH

to make a partial entry update.

DELETE

to delete an entry.

Headers

Enter the desired request headers. You don't have to add authorization headers; we've already done that for you.

Query String

Enter the request query string.

Body

Enter the body content for your API call.

The following API call returns all topics containing the text "event":

Meetup_Pro.png

Matches of the search can be found in the module's Output under Bundle > Body. In our example, 23 topics were returned:

61f2735198e70.png

Watches an event for new comments.

Connection

Establish a connection to your Meetup account.

Group URL Name

Enter the Group URL Name of the group whose event you want to watch for new comments. The Group URL Name is the part of the URL after the slash: e.g., if the URL is https://www.meetup.com/Tech-Meetups-Prague/> then Tech-Meetups-Prague is the Group URL Name.

Event ID

Select or map the event you want to watch for new comments.

Limit

Set the maximum number of comments Make will return during one execution cycle.